Send Email
Send SMS
Search


UBIQUITI POE INJECTOR

Our range of products include ubiquiti networks poe-24-12w external poe injector white and ubiquiti networks poe-24-12w external poe injector (white).

Ubiquiti Networks Poe-24-12W External Poe Injector White

REQUEST CALLBACK

Ubiquiti Networks Poe-24-12W External Poe Injector White
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1,000 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandUbiauiti
Model Name/NumberPoe-24-12w
ColorWhite
Frequency50/60Hz
Dimensions87 x 44 x 29 mm
Weight92 g (3.25 g)
Output Voltage24VDC,0.5A
Rated Voltage100-240VAC
Switching Frequency50 kHz

Power over ethernet or poe describes any of several standardized or ad-hoc systems which pass electrical power along with data on ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or ip cameras. Unlike standards such as universal serial bus which also power devices over the data cables, poe allows long cable lengths. Power may be carried on the same conductors as the data, or it may be carried on dedicated conductors in the same cable. There are several common techniques for transmitting power over ethernet cabling. Two of them have been standardized by ieee 802.3. Since only two of the four pairs are needed for 10base-t or 100base-tx, power may be transmitted on the unused conductors of a cable. In the ieee standards, this is referred to as alternative b. Power may also be transmitted on the data conductors by applying a common-mode voltage to each pair. Because twisted-pair ethernet uses differential signalling, this does not interfere with data transmission. The common mode voltage is easily extracted using the center tap of the standard ethernet pulse transformer. This is similar to the phantom power technique commonly used for powering audio microphones. In the ieee standards, this is referred to as alternative a. In addition to standardizing existing practice for spare-pair and common-mode data pair power transmission, the ieee poe standards provide for signalling between the power source equipment (pse) and powered device (pd). This signaling allows the presence of a conformant device to be detected by the power source, and allows the device and source to negotiate the amount of power required or available. Up to a theoretical 51 watts is available for a device, depending on the version of the standard in use and the vendor of the hardware
Yes! I am Interested

View PDF

Ubiquiti Networks POE-24-12W External PoE Injector (White)

REQUEST CALLBACK

Ubiquiti Networks POE-24-12W External PoE Injector (White)
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1,000 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Model Name/NumberPOE-24-12W
Part NumberPOE-24-12W (EU)
BrandUBIQUITI
Output Voltage24 Volts
Weight227 g

Ubiquiti Networks POE-24-12W External PoE Injector
Power over ethernet or poe describes any of several standardized or ad-hoc systems which pass electrical power along with data on ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or ip cameras. Unlike standards such as universal serial bus which also power devices over the data cables, poe allows long cable lengths. Power may be carried on the same conductors as the data, or it may be carried on dedicated conductors in the same cable. There are several common techniques for transmitting power over ethernet cabling. Two of them have been standardized by ieee 802.3. Since only two of the four pairs are needed for 10base-t or 100base-tx, power may be transmitted on the unused conductors of a cable. In the ieee standards, this is referred to as alternative b. Power may also be transmitted on the data conductors by applying a common-mode voltage to each pair. Because twisted-pair ethernet uses differential signalling, this does not interfere with data transmission. The common mode voltage is easily extracted using the center tap of the standard ethernet pulse transformer. This is similar to the phantom power technique commonly used for powering audio microphones. In the ieee standards, this is referred to as alternative a. In addition to standardizing existing practice for spare-pair and common-mode data pair power transmission, the ieee poe standards provide for signalling between the power source equipment (pse) and powered device (pd). This signaling allows the presence of a conformant device to be detected by the power source, and allows the device and source to negotiate the amount of power required or available. Up to a theoretical 51 watts is available for a device, depending on the version of the standard in use and the vendor of the hardware

Additional Information:

  • Item Code: POE-24-12W
  • Delivery Time: 2
  • Yes! I am Interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Prashad Computer World
    Abhinav Jain (Co Owner)
    Office No. 312-312 A, Shakuntala Building, No. 59 , Nehru Place,
    New Delhi - 110019, Delhi, India
    Call Us: 
    Call Response Rate: 92%
    Share Us :
    F G T L



    © Prashad Computer World. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Prashad Computer World